CHLORINATED SOLVENT-FREE REMOVER
FOR PAINTS INCLUDING POWDER, VARNISH, RESIN, UV RESIN, SINGLE-PACK
GRAFFITI COVERING, DUAL-PACK AND THERMOSET.
POWERFUL PAINT REMOVER, GELIFIED,
CAN BE USED ON VERTICAL SURFACES
ELIMINATION OF STYRENE RESIDUES ON PLASTIC INJECTION MOULDS
DESCRIPTION
DECAP 1000 has been specifically made for the cleaning and pickling of mold cavities.
It is recommended for the elimination of implemented agents at the time of molding operations per injection : it eliminates silicones, paintable silicones, esters, waxes but also the amalgams of minerals such as stearates used in mixture with the polyamide and polystyrene pellets.
DECAP 1000 is also appropriate for the elimination of the deposits generated by the processes. In the event of brutal cooling of the molds, components of the plastics of low molecular mass - oligomers solidify less quickly than their counterparts of raised molecular mass and settle on the surface of the molds.
DECAP 1000 eliminates all the residues, but also the traces of oxidation, it does not generate corrosion.
DECAP 1000 is also appropriate for the cleaning of the vents but also the guides of ejectors.
MODE OF USE
Apply the product on the molds to be cleaned. Let act a few minutes. Wipe in order to eliminate the dissolved residues.
DECAP 1000 IS GUARANTEED WITHOUT METHYLENE CHLORIDE.
PHYSICO-CHEMICAL PROPERTIES TYPICALS
|
PROPERTIE |
STANDARD or PRACTICE |
VALUE |
MEASUREMENT (UNIT) |
|
Appearance |
Visual |
Thixotropic fluid |
- |
|
Colour |
NF M 07.003 ASTM D 156 |
Blue |
Rating |
|
Odour |
Olfactory sense |
Scent / Fragrance |
- |
|
Density at 20°C |
ISO 12.155 |
905 |
g/L |
|
Application temperature |
- |
-10°C +80°C |
- |
|
PROPERTIES OF ACTIVE INGREDIENTS |
|||
|
PROPERTIE |
STANDARD OR PRACTICE |
VALUE |
MEASUREMENT (UNIT) |
|
Flow Time Viscosity Cup 3 at 25°C |
ISO 2431 |
58 |
dry |
|
Auto-ignition point |
ASTM E 659 |
greater than 200 |
°C |
|
Acid value |
ISO 6618 |
0.0 |
mg/(KOH)/L |
|
Sulphated ash content |
NFT 60 144 |
0.0 |
% |
|
Impurity content greater than 5µ |
FTMS 791 3005 |
0 |
nb/ml |
PRESENTATION
|
|
Aerosol 650 ml
|
Looking for another product ?
Discover our entire range by clicking on the photo
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 